AMCO Integrity Pty. Ltd is an independent company registered in Australia. It is a highly innovative engineering and consulting company engaged in state of the art R&D and product development in the energy sector, including renewable and small scale energies, and in high temperature plant issues in general…
The Electric Discharge Sampling Equipment (EDSE) was developed by our UK based partner in collaboration with international partners to aid in the condition and life assessment of components. The sampling of in-service components has long been seen as an effective way of determining actual material properties and sub-surface material
The Portable Scanning Force Microscope (Integrity-Scanning Force Microscope) has been developed for early stage damage detection such as creep cavitation (especially in P91 & P92 steels) which will not be found using traditional replication techniques.…
Obikou is an on-site service for power, process and other high temperature plant and has shown to achieve creep life extension by a factor of about 4. It simply involves quickly reinforcing a potentially vulnerable or creep damaged pipe with multiple layers of thin high-temperature alloys strip that is wound/wrapped around a pipe thus halting/ reducing the development of creep damage….
AMCO has excellent expertise through its in-house R&D, plant service/technical
consulting and project management experience and links with plant manufacturers,
plant operators, service providers and researchers from around the world.
CAMS2018 continues a series of meetings that evolved from cooperation between two eminent materials professional societies in Australia: Materials Australia (MA) and the Australian Ceramic Society (ACS). The forging of joint objectives has created a series of meetings that started in 2004. These have been:
AMCO Integrity Pty Ltd presented a paper on “Plant Life Management using latest technologies”. ,
A combined MA/ACS conference (MAC-1): Melbourne 29th November – 1st December 2004. co-Chairs Jian-Feng Nie and Nigel Stone.
Materials & AustCeram 2007 (MAC-2): Sydney 4th – 6th July 2007. co-Chairs Simon Ringer and Dan Perera.
Materials & AustCeram 2009 (MAC-3): Surfers Paradise 1st – 3rd July 2009. co-Chairs Jian-Feng Nie and Chris Berndt.
CAMS 2014: Sydney 26th – 28th November 2014. co-Chairs Julie Cairney and Chris Sorrell
CAMS 2016: Melbourne 6th – 8th December 2016. co-Chairs Chris Berndt and Peter Hodgson
CAMS2018 builds on the legacy of the above meetings and the co-Chairs recognise, and are grateful for, the contributions and ground-breaking work of the Past Chairs of these meetings. Thank you!