Asset Management Training
AMCO Integrity Pty Ltd is world renowned for its training courses.
AMCO offers specialist training courses in a variety of areas, including –
- Plant Life Assessment & Management
- Gas Turbines
- Steam Turbines
- New Advanced Materials (T23/24, P91, P92, Nickel based alloys, etc.)
- HRSG Integrity
- Plant Cycling (conventional steam plants, CCGT and HRSG)
- Weld Repair & Assessment
- Risk Based Maintenance & Inspection etc.
By training with AMCO you can be confident that you are learning from top industry and academic experts.
Bespoke training for your needs
In addition to our regularly run training courses, AMCO is happy to provide bespoke training courses to suit your needs. These can be held at your sites anywhere in the world.
Alternatively, our state of the art videoconferencing suite enables delegates to remotely participate in our courses, allowing complete participation while saving time and money.
Gas Turbine Technology |
Module 1-
Design, Operation, Materials and Integrity/ Lifing Issues -Workshop: Case studies on damage and service life taken from GT operation. Module 2- Material Selection, Design, Material Degradation, Coatings, Repair & Life Assessment Module 3- Lifing of Hot-gas path components | 4 or 5 Days |
Steam Turbine Technology |
Module 1-
Materials & Damage Mechanisms. Module 2- Maintenance, Inspection & Repair Module 3- Life Assessment of Steam Turbines Practical Examples | 1 or 2 Days |
Life Management Foundation (LMF) |
LMF 1-
Plant Operation, Damage and Life Assessment LMF 2- Failure Avoidance and Advanced Assessment of Complex / Welded Components LMF 3- Damage and Defect / Crack Assessment under Creep and / or Fatigue Conditions Examples | 6 Days |
Power Plant Boilers Inspection, maintenance & Monitoring |
Module 1-
Plant Maintenance Issues Module 2- Plant Inspection and Monitoring Module 3- Introduction to Risk Based Maintenance Module 4- Workshop | 1 or 2 Days |
Supercritical Plant- Design, Materials, Operation & Maintenance |
Module 1-
Plant Design Characteristics Module 2- Materials of Construction Module 3- Damage Mechanisms & Life Assessment Module 4- Operation & Maintenance Experience | 3 or 5 Days |
Design of Boiler Combustion Systems and Retrofit Technology |
Module 1-
Design of Boiler System Module 2- Design Technology of Boiler Combustion Technology Module 3- Design of Boiler Tube Heating Surfaces and Sizing of Pressure Parts Module 4- Boiler Retrofit Technology and Boiler Combustion Optimisation | 1 to 4 Weeks |
Turbine Failure Analysis & Life Assessment |
Module 1-
Steam Turbine Component Damage Mechanisms Module 2- Gas Turbine Design, Operation, Materials and Integrity/Lifing Issues Module 3- Steam Turbine Component Failure Module 4- Gas Turbine Component Degradation and Failure Module 5- Fundamentals, Cyclic operation & Refurbishment Module 6- Lifing of GT Hot-gas path components Module 7- Steam Turbine Component Integrity/Lifing Issues Module 8- Analytical and numerical models for remaining creep life estimation | 3 Days to 3 Weeks |
P/ T 91 |
Module 1-
Material Properties & Heat Treatment Module 2- Steam-Side Oxidation of Thin Wall Tubing Module 3- Welding & Welded Component Behaviour Module 4- Component Integrity / Life Assessment | 2 to 3 Days |
HRSG Integrity |
Module 1-
Principles of HRSG Design and Cyclic Operation Related Issues Module 2- HRSG Materials, Welding, Water Treatment, Corrosion and Other Failure Mechanisms Module 3- Inspection, Monitoring and Maintenance Issues Module 4- HRSG Component Life Assessment and Workshop | 2 to 3 Days |
P/ T 23 |
Module 1-
T/P23 Material Properties and heat Treatment Module 2- T/P23 Weld Consumables and Welding Issues Module 3- Steam Side Oxidation, Component Integrity/Life Assessment | 1 to 2 Days |
Risk Based Maintenance & Inspection (RBMI) |
First Programme:
Management Programme Level Second Programme: Implementation Programme Level Third Programme: Component Condition Programme Level Fourth Programme: Prioritization | 2 to 3 Days |
Boiler/HRSG and Steam Turbine Remaining Life Assessment & Extension |
Module 1-
Overview of Component Life Assessment & Damage Mechanism
Module 2- Lifing Methodologies / Available Tools Module 3- Component Life Assessment Module 4- Plant Life Management | 5 Days to 4 Weeks |